“Smoothening your woodwork enhances its beauty and also makes it neat.”

But there’s nothing beautiful about smoothing your work manually with sandpaper. In fact, it doesn’t matter if you are an avid woodworker; the process is nerve-racking. Yet, it’s a necessity.

WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base

The worst part is that with one mistake, an excellent piece can get condemned. Sanding your woodwork can become effortless and way more precise with a Disc sander.

However, selecting the best product is important. And speaking of best product a WEN 6502T Disc Sander comes to mind.

It has easy-to-use and versatile features that help you get rid of splinters and rough edges. If you are interested in getting a new disc sander, this might be a great choice.

Don’t just take my words for it, check out this detailed review to help you make an informed decision.

Let’s dive in.

Benefits of a Disc Sanders

  • Time-Saving

Sanding manually is time-consuming. However, with a tool, you can get twice as much work done within a short period without exerting so much energy. To hasten your hands-on jobs, get crafty with a Disc Sanders.

  • Smoothing Ragged Edges

Ragged edges or rough cuts are unpleasant to the eyes. Even a nonprofessional would get turned off by a piece with rough finishing. With a disc sander, your piece can get as neat as possible.

  • Versatile

Metal, plastic, wood? Just name it. You can use this machine on a wide range of materials and get a satisfying result. This feature makes disc sanders desirable to many shop owners.

What Does WEN 6502T Disc Sander Do?

This disc sander has a dual function, disc sander, and belt sander. The belt sander feature uses a facile sanding method to smoothen coarse and primitive wood. It’s also capable of sanding other materials like metal, plastic, etc.

The disc sander feature allows it to make finer polishing and remove paint jobs.

Pros of WEN 6502T Disc Sander

  • Versatile in nature: with sanding belt and disc sander in the same machine.
  • Suitable for heavy-duty jobs
  • Easy setup and use
  • The sturdy iron base enhances steadiness
  • Impressive safety features
  • Effective and reliable


  • The Components produce less toque
  • The dust collector is not fully functional

Notable Features

Armed with 14 amp and a ½ horsepower, WEN 6502T is powerful enough to handle the heavy load. This means you are unlikely to experience the machine shutting down while working on a tough workload. The iron cast base helps limit excessive vibration during use.

WEN 6502T Disc Sander’s belt is 4 by 36 inch and it tilts between an angle of 0 to 90 degrees depending on the work.

It’s also equipped with an 80-gird disc and belt. The 6 inches disc and is on the side of the machine. This disc makes it possible to sand any material you intend to work with. Plus, it has a sturdy aluminum table for the sanding belt and disc.

In addition, the miter gauge on this machine holds your workpiece while you sand rough edges and angles. And as far as safety is concerned, an inbuilt stop bar is in place. Although its efficacy is in question, there is a 2.25-inch dust port connected to a dust extractor.

Assembling Your WEN 6502T Disc Sander

Getting this power tool ready to run is pretty much a seamless task. When you unbox the WEN 6502T, you will find an illustrative instruction manual off the bat.

Furthermore, the box contains all accessories you need to attach, including the table for the sanding disc/belt with its unique thumb screw. Almost all the tools you need to install and assemble this disc sander are in the box.

The setup should take you about 5-10 minutes if you are a DIY enthusiast. For someone that’s not so skilled with assembling tools, a little over 10 minutes will do the trick.

How to Change the belt of WEN 6502T Disc Sander?

You can’t avoid changing the belt of your belt sander. The most important thing is being ready when the need arises. So, how do you equip your belt sanders with a new belt?

  1. Loosen the belt screw and lock
  2. Raise the sanding belt to about 45 degrees angle
  3. Pull the tension lever to slacken the sanding belt a little
  4. Gradually shimmy the former belt off the sanding drums. Note that it will still be a little tight, so you must move it gradually on both sides to get it off completely.
  5. Replace it with a new belt.
  6. Push the tension lever back to its position
  7. Lower the belt back to its usual position
  8. Tighten the screw
  9. Using the sanding belt adjustment knob, ensure the new belt is running straight. If the belt doesn’t run straight, it will slide off the sanding drums.
  10. Once you have confirmed the new belt is properly aligned, you may get back to work.

In a Nutshell: Is WEN 6502T Disc Sander Worth Your Money?

If it’s a question of versatility, WEN 6502T aced that part. Portability? It’s certainly compact enough. As regards effectiveness, you can be certain your projects will never lack a sterling touch.

Is WEN 6502T Disc Sander worth your money? I believe it’s worth your money. Regardless of what task you throw at it, this tool will handle it with exceptional precision and accuracy. With this power tool on your worktable, you can work with ease. Give OnlineGroceryReview.com A Try? Expert-Led Reviews, Recommendations, And Roundups The best Shopping Content From The Top Grocery.

Read More Our Review:

Don’t Miss Our Picks of The Popular Articles:

  1. How To Identify Wrangler Jeans (ZM3CSCN)? 6 Things You Didn’t Know
  2. STDcheck.com is The Leader in STD Testing
  3. How To Identify Original Levi’s Jeans? 7 Simple Ways To Help You
  4. Gskyer Telescope AZ 70400, Easy And Fun!
  5. 9 Tips And Tricks For U-MAX 44in Outdoor Propane Gas Fire Pit Table
  6. Why is WEN 6502T Disc Sander One of the Best?
  7. DASH Safe Slice Mandoline Slicer(DSM100), Why Is It A Great Addition To Anyone’s Kitchen?
  8. Yamaha RX-V685BL(B07BZZCHGN), 7 Things You Need To Know
  9. Do Carhartt Men’s K87 Workwear Pocket Short-Sleeve T-Shirt Shrink?